Shri G. S. Institute of Technology and Science, Indore

Designation: Professor
Employee ID: 245
Qualification: Ph.D.
Date of Joining: 29/03/1995
: 0731-2582371
: This email address is being protected from spambots. You need JavaScript enabled to view it.
: Detailed Profile

About Faculty: Dr Avadhesh Dalpati joined the department in 1995 as Lecturer in the institute. He is currently Professor and Head of the department, Earlier, he has been associated with Department of Management Studies (DOMS) as the HOD since its inception till 2020 in the Institute. He received his Master of Engineering in Industrial Engineering and Management from Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal. He has earned PhD degree from Indian Institute of Technology Roorkee in the area of supply chain management. He has about 25 years of teaching and research experience at SGSITS, Indore. He has the rich experience of administrative responsibilities such as Chief Warden - Hostels, Co-ordinator-PG Admissions, Member- Career Advancement Commtt. in the institute.He is member in editorial boards of reputed national and international journals. He has successfully guided 03 PhD scholars. He has published more than 50 research papers in various national and international journals and conferences.

Education and Qualification:

S. No.	Degree	Specialization	Year	University/Board
1	PhD	Supply Chain Management	2011	IIT Roorkee
2	M.E.	Industrial Engineering & Management	2002	RGPV, Bhopal/SGSITS Indore MP
3	B.E.	Industrial and Production Engineering	1994	DAVV, Indore/ SGSITS Indore MP

Work Experience:

S. No.	Designation	Department	Employer	Duration
1	Professor	Industrial & Production Engg.	SGSITS, Indore	29.03.2012 till date
2	Associate Professor	Industrial & Production Engg.	SGSITS, Indore	29.03.2006 to 29.03.2009
3	Reader	Industrial & Production Engg.	SGSITS, Indore	29.03.2003 to 29.03.2006
4	Lecturer	Industrial & Production Engg.	SGSITS, Indore	29.03.1995 to 29.03.2003

Research Details:

Supply Chain Management,
Production and Operations Management,
Knowledge Management,
Industrial Engineering.

Publications:

1. Research Paper Publications

(I) International/National Journal Publications

1. Chandak A., Kumar N., Dalpati A. (2020), ‘Impact of ––Supply Chain Strategy on Supply Chain Performance: A Structural Equation Modeling in the context of Small Scale Indian Automobile Industries’, International Journal of Scientific & Technology Research, Vol. 09, Issue-01, ISSN 2277-8616.

2. Birasnav M, Mittal R.,, Dalpati A. (2019), ‘Integrating Theories of Strategic Leadership, Social Exchange, and Structural Capital in the Context of Buyer-Supplier Relationship: An Empirical study’, Global Journal of Flexible Systems Management,

3. Chandak A., Kumar N., Dalpati A. (2019), ‘Statistical Analysis of Impact of Strategy & Flexibility on Supply Chain Performance in the Perspective of Indian Automobile Manufactures’, International Journal of Innovative Technology and Exploring Engineering, Vol.-09, Issue-01, ISSN: 2278-3075.

4. Chandak A., Chandak S., Dalpati A. (2019), ‘Analysis of the Impact of Supply Chain Flexibility on Supply Chain Performance: An Empirical Study in the Indian Automotive Industry’ Industrial Engineering Journal, Vol.-12 Issue 3, ISSN:2581-4915.

5. Chandak S., Kumar N., Dalpati A. (2019), ‘The Impact of E-Business on Supply Chain Performance in the context of Indian Automobile Industry’, The IUP Journal of Supply Chain Management, Vol.-XVI, No.-02.

6. Chandak A., Chandak S., Dalpati A. (2018), ‘A Study of Impact of Supply Chain Strategy on Supply Chain Performance: An Empirical Investigation on Automobile Industry in India’ Journal of Supply Chain Management System, Vol. 7 Issue-3, pp.01-07.

7. Rai K., Lodha R., and Dalpati A. (2017), ‘Mass customization is new trend for textile industries’ International Journal of Development Research, Vol. 07, Issue-2, ISSN: 2230-9926.

8. Chouksey A. Dalpati, A. (2017), ‘An application of quality function deployment: a case of gymnasium’, Journal of Indian Institution of Industrial Engineering, pp. 42-49.

9. Rai K. and Dalpati A. (2015), ‘Mass customization practices for manufacturing industries’, International Journal of Innovations in Engineering and Technology, Vol. 06, Issue-2, pp. 234-238, ISSN: 2319 - 1058.

10. Jauhar S., Shrivastava K., and Dalpati A., (2012), “Third party logistics practices in south-asian countries: A comparative analysis”, Advances in Mechanical Engineering and its Applications (AMEA), Vol. 2, No.3, pp. 174-180.

11. Sadhwani S., Sohani N., and Dalpati A., (2011), “Supply chain optimization: A case of diaper industry”, International Journal of Business and Technology Research Vol.4, No.1, pp.1391-1398, 2011.

12. Birasnav, M., Rangnekar, S., and Dalpati, A., (2011), "Transformational leadership and human capital benefits: the role of knowledge management", Leadership & Organization Development Journal, Vol. 32, No. 2, pp.106-112, 2011.

13. Dalpati A., Rangnekar S., and Birasnav M, (2010), "Knowledge management and supply chain flexibility performance in Indian manufacturing industry: An Empirical Study”, Global Journal of E-Business & Knowledge Management, Vol. 6, No. 1, pp.10-16, Dec 2010 Issue, 2010.

14. Birasnav M., Rangnekar S., and Dalpati, A., (2010), “Transformational leadership, interim leadership, and employee human capital benefits: an empirical study”, Procedia – Social and Behavioral Sciences Journal, Vol. 5, pp. 1037-1042, 2010.

15. Birasnav M., Rangnekar S., and Dalpati, A., (2010), “Enhancing employee human capital benefits through investment in knowledge management: a conceptual model”, Global Journal of E-business & Knowledge Management, Vol. 5, No. 1, pp. 20-26, 2010.

National Journals:

16. Shrivastav P., Dalpati A., Singh A.K., and Goyal M.D., (2013), ‘Dynamic response of corrugated panels under blast loading’ CSVTU Research Journal, Vol.6, pp.38-42.

17. Dalpati A. and Rangnekar S., (2008), ‘Knowledge management implementation at BHEL, Haridwar: a case study’ The Journal of Army Institute of Management (KINDLER), Vol. 8, No. 2, pp. 27-34, 2008.

18. Khan S. and Dalpati A., (2012), ‘Material handling Safety Measures’ Chemical Engineering World, Vol.47, No.11, pp.50-53, Nov.’12 Print, 2012.

(II) International/National Conference Publications

1. lalwani P. and Dalpati A., (2021), “Analysis of Barriers of Lean Manufacturing using Interpretive Structural Modelling in Indian Context” in the proceedings of the International Conference on Innovations in Product, Process and System Design (ICIPPSD-2021) at SVITS, Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore, 05-06 March.

2. Choubey N.K. and Dalpati A., (2021), “Productivity Improvement of Assembly Line Through Value Stream Mapping: A Case Study” in the proceedings of the International Conference on Innovations in Product, Process and System Design (ICIPPSD-2021) at SVITS, Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore, 05-06 March.

3. Satyam Tiwari, Gupta. R.C., and Dalpati A., (2021), “Determination of Marketing Strategy for a Logistics Company: An Analytic Hierarchy Process Approach” in the proceedings of the International Conference on Innovations in Product, Process and System Design (ICIPPSD-2021) at SVITS, Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore, 05-06 March.

4. Chouksey A., Dalpati, A., and Agrawal P., (2017), “Productivity Study of Engine Assembly Line using MOST: A Case Study” in the proceedings of 4th International Conference on Industrial Engineering (ICIE-2017) at SVNIT Surat, 21-23 Dec.

5. Chandak A., Chandak S., and Dalpati A. (2017), “Impact of Supply Chain Strategy Dimensions on Supply Chain Performance Dimensions: An Empirical study in the Indian Automotive Industry” in the proceedings of 4th International Conference on Industrial Engineering (ICIE-2017) at SVNIT Surat, 21-23 Dec.

6. Chandak S., Chandak A., and Dalpati A. (2017), “Impact of Goods and Services Tax (GST) on Supply Chain in India” in the proceedings of 4th International Conference on Industrial Engineering (ICIE-2017) at SVNIT Surat, 21-23 Dec.

7. Chouksey A. and Dalpati, A., (2017), “Sustainable Management of Water in Indian Context” in the proceedings of 4th International Conference on Research &Business Sustainability (ICRBS-2017) at IIT Roorkee, 16-17 Dec.

8. Rohit K., Rathaur G., and Dalpati, A., (2017), "Assessing the Effectiveness of Value Stream Analysis towards the Lean Improvements: An Application-based Approach" 2017 in the Proceedings of The POMS 28th Annual Conference, Seattle, Washington, U.S.A.

9. Dutta D., Dalpati A., and Rohit K. (2016), “Analysis of Bullwhip Effect in Overstock and Understock Situations: A Review” in the proceedings of International Conference on E-Business and Supply Chain Competitiveness (EBSCC-2016) at IIT Kharagpur, pp. 491

10. Badgujar P., Bhagat A., and Dalpati A. (2015), “A study on Status of Logistics Infrastructure in India”, in the Proceedings of the 4th International Conference on Sustainability and Manufacturing Strategy (ICSMS-2015), held at Institute of Management Technology, Nagpur, Maharashtra, 4-5 Sept.

11. Jain N., Thakar G., Dalpati A., and Rohit K.(2013), “Supplier Selection and Evaluation in Automobile Industry: Application of AHP Approach”, in the Proceedings of The International Conference on Industrial Engineering (ICIE2013) 20-22 Nov., SVNIT Surat, Gujarat, pp.204-208, ISBN- 978-93-83083-37-4. Excellent Publishing House, 2013.

12. Shah P.K., Pradhan A., Dalpati A., and Gupta R.C. (2013), “Assembly Line Balancing Heuristic Approach: A Case Study” in the Proceedings of The Second International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM), 16-18 Dec. 2013, IIT Indore. pp. ©Emerald Group Publishing Limited, 2013.

13. Goel, M.D., P. Shrivastava, A. Dalpati and A.K. Singh (2013), “Dynamic Response of Corrugated Panels under Blast Loading”, In the Proceedings of International Conference on Advances in Mechanical Engineering (ICMAE-2013), 29-31May 2013, College of Engineering Pune, Maharashtra, India, 2013.

14. Rohit K., Rathaur G., and Dalpati, A., (2012), “Effectiveness of the Seven Value Stream Mapping (VSM) Tools towards Lean Improvement: Case Study of a Manufacturing Unit”, Proceedings of the XVI Annual International Conference of the Society of Operations Management (SOM 2012)”, DMS, IIT Delhi (India), Vol.1, pp. 450-458, 2012.

15. Shrivastava K., Jauhar S., and Dalpati A., (2012), “No winner in labour strike: A case study” in the proceeding of sixth PIMR International Conference on Business Innovations and Enterprenuership: Transforming World Economy at PIMR Indore, 11-12 Feb, 2012.

16. Jauhar S. and Dalpati A., (2011), “Cost reduction through value analysis in galvanization process” in the proceeding of International Conference on Industrial Engineering (ICIE 2011) at SVNIT Surat, 2011.

17. Kamlekar N., Gupta R.C., and Dalpati A., (2012), “Implementation of Assembly Line Balancing in a Labour Intensive Manufacturing Unit”, In the Proceedings of National Conference on Emerging Challenges for Sustainable Business, at DOMS, IIT Roorkee, pp.1772-1783, ISBN - 978-93-81583-46-3, 2012.

18. Rathaur G., Kumar R., Dandekar M., and Dalpati A., (2012), “Mapping the Current State Value Stream: Case Study of a Manufacturing Unit “, In the Proceedings of National Conference on Emerging Challenges for Sustainable Business, at DOMS, IIT Roorkee, pp.1772-1783, ISBN - 978-93-81583-46-3, 2012.

19. Diwakar G.K., Dalpati A., and Gupta R.C., (2012), “A Survey on 3PL practices in Manufacturing Industries”, In the Proceedings of National Conference on Emerging Challenges for Sustainable Business, at DOMS, IIT Roorkee, pp.1584-1597, ISBN - 978-93-81583-46-3, 2012.

20. Khan S. and Dalpati A., (2012), Study of Material Handling Safety Measures in Chemical Industry, In the Proceedings of National Conference on Emerging Challenges for Sustainable Business, at DOMS, IIT Roorkee, pp.1838-1846, ISBN - 978-93-81583-46-3, 2012.

21. Dalpati A. and Rangnekar S., (2011), “Supply chain flexibility performance in Indian manufacturing firms” Paper presented at National Conference of Research Scholars in Management (NCRSM-2011) at ABV-IIITM, Gwalior, 2011.

22. Sadhwani S., Sohani N., and Dalpati A., (2011), “Supply chain optimization: A case of diaper industry”, in the proceedings of International conference on managing excellence for emerging global paradigm in business and technology at CHIMC, Indore, 2011.

23. Dalpati A., Rangnekar S., and Birasnav M, (2010), ‘Knowledge management and supply chain flexibility performance in Indian manufacturing industries: an empirical study’ in the proceedings of Tenth Global Conference on Flexible Systems Management (GLOGIFT’10) at Keio University, Japan.

24. Dalpati A. and Rangnekar S., (2008), “Integrating Knowledge Management Fundamentals with Theory of Constraints”, Paper presented at International Conference on Management (INCOM) at MLS University, Udaipur, 2008.

25. Dalpati A. and SriYogi K., (2006), “Reverse Logistics: a Forgotten Child of Supply Chain”, in the proceedings of National Conference on Advances in Mechanical Engineering, (AIME-2006), Jamia Millia Islamia, NewDelhi, Jan 20-21, 2006.

26. SriYogi K., Dalpati A., Gupta R.C., and, Gupta R., (2006), “Mass Customization: Implications of IT”, In the proceedings of International Conference on Productivity, Quality and Reliability (ICPQR), December06, IIT Delhi, 2006.

27. Dalpati A. and Prasad R.M., (2006), “Intelligent Supply Chain Management”, in the proceedings of International Conference on Productivity, Quality and Reliability (ICPQR), December06, IIT Delhi, 2006.

28. SriYogi K., Dalpati A., and Gupta R.C., (2006), “Supply Chain Production Planning in Mass Customization Environment”, in the proceedings of National Conference on Advances in Mechanical Engg., March06, Engg. College Kota, Rajsthan, 2006.

29. SriYogi K., Dalpati A., and Gupta R.C., (2006), “Role of Data in Managing Information System”, National conference on Information and Emerging Technologies, February06, IET Ropar, Bhaddal, 2006.

30. Jain K.C., Jain S., Verma P.L., and Dalpati A. (2005), “Process Capability Index: A Measure of Six Sigma System”, in the proceedings of Fifth Global Conference on Flexible Systems Management (GLOGIFT’05) 27-30 December, RGPV, Bhopal, MP, 2005.

Projects: