JOURNAL PAPERS JANUARY 2004 ONWARDS

1. D Joshi, B Ravi, “ Feedability Analysis and optimisation driven by Casting Simulation”, Indian Foundry Journal, 53 (6), 71-78, 2007.
2. M K Barua, 2007, Impact of Regulations on Direct Insurance Broker Channel and Performance& Cost Comparison with Bancassurance & Traditional Channels.  International Review of Business Research Papers (in print)
3. D Joshi, B Ravi, Kamalesh Singh, “Part, Tooling and Method Optimization driven by Simulation and Cost Model” communicated for 68^th World Foundry Congress and 56^th Indian Foundry Congress, Chennai Trade Center, Feb 7-10, 2008. (in print)
4. G Thakar, A K Chitale and K R Patil, 2007, “Assessment of Environmental Impact and Prioritising DfE Strategies for a sports utility vehicle – A Case Study”, Industrial Engineering Journal. Bombay (in print)
5. M Dandekar and  Dr.A.K.Chitale, 2007, “Selection of Grinding Wheel in Precision Grinding  & Mechanics of  Grinding Wheel Wear”Manufacturing Technology and Research An International Journal (in print)
6. M K Barua (2006) Bancassurance in Life Insurance in India: The Brick and Mortar Model. ICFAI Journal of Risk and Insurance.Vol-III, No. 3, July, 42-52.
7. D Joshi et al, “Product Lifecycle Management for New Product Development” published in Industrial Product Finder Journal. p360-363, 2006
8. D. Joshi, B Ravi, J. Rao and Nagar N K "Environment Impact of Ferrous Castings Quantified Using Lifecycle Analysis," Indian Foundry Journal, 52(1), 33-42, 2006
9. G D Thakar, A K Chitale, Manish Bhide, “An Assessment of Environmental Impact and Determination of Optimal DFE Strategy for Automobile Components-A Case Study” Udyog Pragati Vol.30 No.1 Jan-Mar 2006
10. M Dandekar and A. K. Chitale “Effect of Modified Dressing Parameters on Plunge Grinding for Crankshaft ” Industrial Product Finder , January 2006 Vol. 34 No. 4, Page 419
11. M Dandekar and A. K. Chitale  “Effect of Operating Parameters on Tool Cost in Crankshaft Grinding ” Industrial Product Finder, June 2006 Vol. 34 No. 9, Page 349
12. M Dandekar and A. K. Chitale “Selection of Grinding Wheel: Grit-Grade Matrix Approach” Manufacturing Technology and Research An International Journal, Jan-June 2006 , Vol. 2  No. 1 & 2 , ISSN No.: 0973-0281, Page 60
13. N. Jain  at al, “Issues in rural, urban disparities in MP”, 2006,  Journal of MPEA, Feb. 2006, Vol. 17, No1, p154-162.
14. G D Thakar, N Joshi, A Doudkhane, “Online Customer Management – Issues and Challenges in Changing Scenario”, SRM Management Digest, April 2005 Vol.3 Pg.27-29.
15. M K Barua et al, “Integration of ERP-CRM Systems in Supply Chain Management”. SRM Management Digest, April 2005, Vol. 3.
16. R C Gupta,  J. Sonwalkar & A. K. Chitale, “Development and analysis of a group replacement model”, Journal of Industrial Engineering, Mumbai, July 2004
17. G D Thakar, A K Chitale, M Bhide “Integrated Product Policy : An Emerging Trend for Sustainable Development - A Review”, SRM Management Digest, April 2004, Pg.35-48
18. R. C. Gupta, J. Sonwalkar & A. K. Chitale, Economics of early equipment management- life cycle costing, Vision :Journal of MDI Gurgaon, July-Dec’2003

CONFERENCE PAPERS   JANUARY 2004 ONWARDS 

1. M Barua, 2007, A Study on Impact of Regulations on Bancassurance and Alternative Channels of Life Insurance. National Conference on Insurance Insights organized by Life Insurance Corporation of India, Zonal Training Centre, Chennai, Feb. 2007.

2.  D Joshi et al, 2007, “Computer-Aided Process Planning System for Spur Gear”, International Conference on Recent Trends in Mechanical Engineering 4-6 October, 2007, Orgnaised by Ujjain Emgineering Conference, Ujjain. (in print)

3.  D Joshi et al, 2007, “Application of Transient Thermal Analysis and Artificial Neural Network for Estimation of Solidification Defect in Casting Junction”, International Conference on Recent Trends in Mechanical Engineering 4-6 October, 2007, Orgnaised by Ujjain Emgineering Conference, Ujjain. (in print)

4.  D Joshi et al, 2007, “Feature Based Manufacturability Evaluation of some Casing Junctions”, International Conference on Recent Trends in Mechanical Engineering 4-6 October, 2007, Orgnaised by Ujjain Emgineering Conference, Ujjain. (in print)

5.   D Joshi et al, 2007, “Low Cost Laminated Object Manufacturing with Adaptive Slicing”, International Conference on Recent Trends in Mechanical Engineering 4-6 October, 2007, Orgnaised by Ujjain Emgineering Conference, Ujjain. (in print)

6.      D Joshi et al, 2007, “Framework and Implementation of Life Cycle Assessment of a Product”, International Conference on Recent Trends in Mechanical Engineering 4-6 October, 2007, Orgnaised by Ujjain Emgineering Conference, Ujjain (in print).

7.   D Joshi, N K Nagar, S Sharma, Life Cycle Analysis Approach for Environmental Impact Evaluation of Typical Consumer Products, National Conference on Emerging Trends in Mechanical Engineering (ETME), SVNIT, Surat, 4th -5th June 2007.

8.      D Joshi, F Ujjainwala, et al. 2007, Evaluation of adaptive slicing algorithms in layered manufacturing, UGC National Conference on Advances in Computer Integrated Manufacturing (NCACIM) February 16-17, 2007, Department of Production and Industrial Engineering, J. N. V. University, Jodhpur

9. A. Dalpati, Dr. R.C. Gupta, K. Sriyogi, “Role of PDM in PLM for e-PLM and Critical Components”, International Conference on New Age Strategies, School of Business, Jammu University (Abstract accepted, to be presented in Nov 2006)

10.Paper accepted ( not presented in person ) for presentation on “Bancassurance in Life Insurance: The Brick and Mortar Model for Indian Market” in  6 th annual Hawaii International Conference on Business, Honolulu ,Hawaii, held on 25-28 May 2006.

11. A. Dalpati, Dr. R.C. Gupta, K. Sriyogi, “Supply Chain Production Planning in Mass Customization Environment”, National Conference on Advances in Mechanical engineering. (ECKAME), Engineering College, Kota, March-2006

12.A. Dalpati and Kottala Sriyogi, “Role of Data in Managing Information System”, National Conference on Information and Emerging Technologies, IET, Ropar, Bhaddal, Feb-2006

13.  G. D. Thakar, V. N. Garg, A K Chitale, “Integrating Environment into Product Design”, National Conference on Changing Trends in Management: Challenges and Opportunities, PIMR Indore, Jan-2006

14.  G. D. Thakar, A K Chitale, Manish Bhide, “Prioritizing DFE strategies for crankcase of An Automobile using AHP”, National Conference on Changing Trends in Management: Challenges and Opportunities, PIMR Indore, Jan-2006

15.  A. Dalpati and Kottala SriYogi, “Reverse Logistics: a forgotten child of supply chain”, AIME-2006, Jamia Millia, New Delhi, Jan 20-21, 2006

16.  G D Thakar, Mahesh Pawar, “Carrying the energy future – Comparison of Hydrogen Electricity as fuels to vehicles of future”, National Seminar on Eco-friendly Technologies and challenges for Mechanical Engineers, Jan 2006, SGSITS, Indore

17.  G D Thakar, Mahesh Dewangan, “QFD for DFE with reference to motorbikes in Indian context” National Seminar on Eco-friendly Technologies and challenges for Mechanical Engineers, Jan 2006, SGSITS, Indore.

18.  D. Joshi, Amit Gupta and Nagar N K “Transient Thermal Analysis of Casting Junctions” published in the proceedings of International Conference on Advances in Materials, Product Design & Manufacturing Systems, 12-14 Dec. 2005 BIT, Sathyamangalam (Erode) p423-429.

19.  D. Joshi, Rajmohan C and Nagar N K “Artificial Neural Network for Estimation of Fluidity Length of Aluminum Alloys” published in the proceedings of International Conference Advances in Materials, Product Design & Manufacturing Systems, 12-14 Dec. 2005 BIT, Sathyamangalam (Erode) p799-805.

20.  A. Dalpati, K. C. Jain, S Jain, and P.L. Verma , “Process Capability Index: A Measure of Six Sigma Quality System”, Fifth Global Conference on Flexible Systems Management, R.G.P.V. Bhopal, 27-30 December 2005

21.A. Dalpati, Rajendra Prasad M., “Intelligent Supply Chain Management”, International Conference on Productivity, Quality and Reliability (ICPQR), IIT Delhi, Dec-2005

22.  A. Dalpati, R. C. Gupta, R Gupta, K. Sriyogi, “Mass Customization: Implication of IT” International Conference on Productivity, Quality and Research (ICPQR), IIT, Delhi. Dec. 2005.

23.  R C Gupta et al, Systems Approach to Orientation and Training:  Key to organization effectiveness, International Conference on Productivity, Quality and Research (ICPQR), IIT, Delhi. Dec. 2005

24.N. Jain “Poverty dynamics in south western tribal belt of MP”, UGC-SAP sponsored international seminar on growth strategy and environmental development at school of economics, DAVV Indore, 18^th Nov 2005.

25.  M K Barua et al, “Winning the Trust of Customers Through   e- CRM: A Study Reveals Relationship between Growth of LIC and Economic Factors” International Conference on Insurance and banking organized by Birla Institute of Technology and Management – Noida, Jan.2005

26.G. D. Thakar, S Soni, A K Chitale, “Design for Environment approach of product refinement –an Evaluation of end-of-life strategies”, ICPQR-2005 IIT Delhi.

27.G. D. Thakar, R.C. Gupta, “Systems-approach to orientation and training – Key to organization effectiveness”, ICPQR-2005, IIT Delhi.

28. M K Barua et al, “Winning the Trust of Customers Through   e- CRM: A Study Reveals Relationship between Growth of LIC and Economic Factors” International Conference on Insurance and banking organized by Birla Institute of Technology and Management – Noida, Jan.2005

29.G. D. Thakar, S Soni, A K Chitale, “Design for Environment approach of product refinement –an Evaluation of end-of-life strategies”, ICPQR-2005 IIT Delhi.

30. D Joshi et al, “Survey of Computer Applications in Indian Foundry Industry: Benefits and Concerns”, Proceedings of the fifty third Indian Foundry Congress, Jan 21-23 2006, Kolkata, p143-153

31.G. D. Thakar, R.C. Gupta, “Systems-approach to orientation and training – Key to organization effectiveness”, ICPQR-2005, IIT Delhi.

32.M K Barua et al, “Logistics Information System for Effective CRM”. 2^nd International Conference on Logistic and Supply Chain, 3-5 August 2004.  Organized by PSG Tech, Coibatore and Center of Supply Chain Management Central- Michigan University, USA.

33.D Joshi et al, “Analysis of Helical Spring Washer” abstract published in souvenir of International Conference on Total Engineering Analysis & Manufacturing Technologies 2-4 Nov. 2004, J N Tata Auditorium, IISc Bangalore

34. G D Thakar “Greening the Supply Chain application areas : Implementation tools and performance parameters” - ECOM-2004 Coimbatore July-2004

35.  M K Barua et al, “Critical Aspects of CRM: Leading to e-CRM” 9^th international symposium on logistics and global out sourcing, held at IIM Bangalore. Organized by IIM Bangalore and The University of Nottingham, 11-14 July 2004.

36.M K Barua et al, “Improving the Supply Chain Profitability Through: Forecasting and Inventory Management”. International conference on Responsive Supply Chain and Organizational Competitiveness, Organized by Coimbatore Institute of Technology, and University of Massachusetts, Jan 5-7 2004.

37.  M K Barua et al, “Importance of Information Flow in 3PL: A Case Study”. International conference on Responsive Supply Chain and Organizational Competitiveness, organized by Coimbatore Institute of Technology, and University of Massachusetts , Jan 5-7 2004.

38.M K Barua et al, “Strategic Fit: Between Competitive and Supply Chain Strategies for Efficiency and Responsiveness”, 6^th PIMR National Conference on “Enhancing Performance: Agenda for Growth”, Prestige Institute of Management and Research, Jan 30-31, 2004