• Designation: Professor & Head
  • Employee ID: 0500257
  • Qualification:  Ph.D.
  • Date of Joining: 11/01/2001
  • :  0731-2582301
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • : Detailed Profile
About Faculty: Myself Dr. Sudhir Tiwar joined the SGSITS, Indore in Jan 2001 as Assistant Prof. I Taught subjects like Engg Materials, Machine Design, Tribology of materials, Reliability Engg, Composite Materials etc. I got the opportunity to perform as Warden of a hostel, Member of counseling Team, OSD Revaluation, Deputy Controller Exam, Controller Exam, PG Course Coordinator, MIS Coordinator TEQIP-III, Member NIRF Committee etc.
Education and Qualification:
S. No. Degree Specialization Year University/Board
1. Ph.  D. Tribology of polymer composites 2011 I I T Delhi, New Delhi
2. M. Tech. Tribology and Maintenance Engg. 1998 MANIT,  Bhopal
3. B.E. Mechanical Engg 1995 Barkatullah Uni, Bhopal
Work Experience:
 S. No.  Designation  Department  Employer  Name  Duration of Employment
 1.  Professor  Mechanical Engg  Director, SGSITS  Jan 2017 to Till date
 2.  Associate Prof.  Mechanical Engg  Director, SGSITS  Jan 2014 to Dec 2016
 3.  Assistant Prof.  Mechanical Engg  Director, SGSITS  Jan 2001 to Dec 2013
 4.  Faculty Member  Mechanical Engg Director, UIT, Barkatullah Uni. Bhopal  Feb. 2000 to Dec. 2000
 5.  Lecturer  Mechanical Engg Director, RKDF Instt. Of Sc. & Tech.,  Bhopal, M. P.  Oct. 98 to Jan. 2000
Research Details:

Research area- Tribology, Engineering Materials, Polymer Composites, Machine Design
PhD Supervision:
Name of candidates Title of Dissertation Present Status
 Rajeev Namdeo

Tribological study of Maleic Anhydride Grafted Polyethylene Modfied Ethylene-Co-Vinyl Acetate/High Density Polyethylene Organomodified Montmorllonite Blended (EVE/ HDPE / MA-G-PE/ OMMT) Nanocomposites

  Completed in May 2020
 Upendra S. Gupta  Mechanical and Tribological Investigation of Plasma Treated Banana-Sisal Epoxy Reinforced Hybrid Composite  RDC Completed
Publications:
Technical Papers Publications
International Journals:
  1. U S Gupta, Sudhir Tiwari, Mechanical and surface characterization of sisal fibers after cold glow discharge argon plasma treatment, Biomass Conversion and Biorefinery, 06 Sept 2022, https://doi.org/10.1007/s13399-022-03247-w, SCI
  2. U S Gupta, Sudhir Tiwari, U Sharma, K Viliya, Cold Glow Discharge Nitrogen Plasma Pretreatment of Banana Fibre for Improving the Mechanical Characterization of Banana/ Epoxy Composites, J. Inst. Eng. India Ser. D, May 2022, https://doi.org/10.1007/s40033-022-00356-8, SCOPUS
  3. U S Gupta, A Dharkar, Mt Dhamarikar, A Kumrawat, N Giri, A R S Chauhan, A Giri, S Tiwari, R Namdeo, Investigation on effects of fiber loading of mechanical properties of banana/sisal hybrid composite, Materials Today: Proceedings, Volume 45, Part 9, Feb 2021, Pages 7829-7837. ISSN: 2214-7853, SCOPUS
  4. U S Gupta, A Dharkar, M Dhamarikar, A Choudhary, D Wasnik, P Chouhan, S Tiwari, R Namdeo, Study on the effects of fiber orientation on the mechanical properties of natural fiber reinforced epoxy composite by finite element method, Materials Today: Proceedings, Vol 45 (9), Feb 2021, Pages 7885-7893. ISSN: 2214-7853, SCOPUS
  5. U S Gupta, M Dhamarikar, A Dharkar, S Chaturvedi, A Kumrawat, N Giri, Sudhir Tiwari, R Namdeo, Plasma modification of natural fiber: A review, Materials Today: Proceedings, Vol. 43 (1) 20 Jan  2021, Pages 451-457. ISSN: 2214-7853 SCOPUS
  6. J V Christy, A H I Mourad, Sudhir Tiwari, M M Sherif, Influence of Graphite and Polytetrafluoroethylene Dispersions on Mechanical, Abrasive, and Erosive Wear Performance of Thermal Spray Coatings, Surfaces and Interfaces, 21, Dec 2020, 100737, ISSN: 2468-0230, IF-4.837, SCOPUS
  7. U S Gupta, M Dhamarikar, A Dharkar, Sudhir Tiwari & R Namdeo, Study on the effects of fibre volume percentage on banana-reinforced epoxy composite by finite element method, Advanced Composites and Hybrid Materials, 3, 530–540 (2020) SCI
  8. Namdeo, S. Tiwari, S Manepatil, N. Chand, Experimental Analysis of Dry Sliding Friction and Wear Behavior of OMMT Nanoclay Added EVA/HDPE/MA-g-PE Compatibilized Polymer Blends with Parametric Study of Influencing Factors, Journal of Testing and Evaluation, 48(2), 2020, PP-1122-1137. SCOPUS
  9. G Yadav, Tiwari, M. L. Jain, Tribological analysis of extreme pressure and anti wear properties of engine lubrication oil using four ball tester, Materials Today: Proceedings 5 (2018) 248-253. SCOPUS
  10. Namdeo, S. Tiwari, S Manepatil, N. Chand, Effect of Addition of Organomodified Montmorillonite Nanoclay on Three-Body Abrasive Wear Behavior of Maleic Anhydride Grafted Polyethylene Compatibilized Ethylene-co-Vinyl Acetate/High Density Polyethylene Nanocomposites, Polymer Composites, 39(11), 2018, PP3962-3968, SCI
  11. Namdeo, R., Tiwari, S., and Manepatil, S., Optimization of High Stress Abrasive Wear of Polymer Blend Ethylene and Vinyl Acetate Copolymer/HDPE/MA-g-PE/OMMT Nanocomposites, ASME Journal of Tribology, 139, 2016, 021610-1 to 021610-6 SCI
  12. Tiwari, John V Christy, Tribological analysis of thermal spray coatings of Ni and Al2O3 with dispersion of solid lubricants in erosive wear modes,Procedia Technology, 23 (2016) 150-155. SCOPUS
  13. Namdeo, R., Tiwari, S., and Manepatil, Development of rubber wheel abrasion testing machine for estimation of three body abrasive wear of automobile components, International Journal on Design & Manufacturing Technologies, Vol. 9 No. 1 January 2015, pp 1-5.
  14. Tiwari, J. Bijwe, Surface Treatment of Carbon Fibers - A Review, Procedia Technology  14, (2014), 505-512. SCOPUS
  15. Verma, S. Tiwari, V. Gehlot, An investigation of abrasive wear in rubber materials, Intl J of Advanced Mechanical Engg, 4(6), 2014, 681-686. SCOPUS
  16. Yadav, P. Ganai, S. Tiwari, M. Maheshwari, An investigation for prior failure of engine component through spectroscopy oil analysis program, Applied Mechanics and Materials, 592-594 (2014) 1362-1365. SCOPUS
  17. Maheshwari, S. Tiwari, P. Ganai, Analysis of lubricant for prediction of contact surface behavior of metals, International Journal of Innovative Technology & Research, Vol. 2(3), 2014, 933-939.
  18. Tiwari, J. Bijwe, Influence of fiber-matrix interface on abrasive wear performance of polymer composites, J of Reinforced Plastics and Composites33(2), 2014, 115-126. SCI
  19. Tiwari, J. Bijwe, Various ways to strengthen the fiber-matrix interface for enhanced composite performance" J of Surface and Interface Analysis, 45 (13) 2013, 1838-1848. SCI
  20. Tiwari, J. Bijwe, S. Panier, Strengthening of fiber-matrix interface – A novel way by using nanoparticles, Intl J of Nanomaterials and Nanotechnology, 3, 2013, 1-8 SCI
  21. Tiwari, J. Bijwe, S. Panier, Optimization of surface treatment to enhance fiber-matrix interface and performance of composites, Wear 274-275, (2012) 326-334. SCI
  22. Tiwari, J. Bijwe, S. Panier, Enhancing the adhesive wear performance of polyetherimide composites through Nano-particle treatment of the carbon fabric, J. Mat. Sci. 47 (2012) 0022-2461. SCI
  23. Tiwari, J. Bijwe, S. Panier, Tribological studies on Polyetherimide composites based on carbon fabric with optimized oxidation treatment, Wear 271, 9-10, (2011), 2252-2260. SCI
  24. Tiwari, J. Bijwe, S. Panier, Gamma radiation treatment of carbon fabric to improve the fiber-matrix adhesion and tribo-performance of composites, Wear 271, 9-10, (2011) 2184-2192. SCI
  25. Tiwari, J. Bijwe, S. Panier, Role of Nano YbF3 treated carbon fabric on improving abrasive wear performance of Polyetherimide composites, Tribol. Lett. 42 (3) (2011) 293-300. SCI
  26. Tiwari, J. Bijwe, S. Panier, Adhesive wear performance of polyetherimide composites with plasma treated carbon fabric, Tribol. Intl. 44 (2011) 782-788. SCI
  27. Tiwari, J. Bijwe, S. Panier, Polyetherimide composites with Gamma irradiated carbon fabric: Studies on abrasive wear, Wear 270, 9-10, (2011) 688-694. SCI
  28. Tiwari, M. Sharma S. Panier, B. Mutel, P. Mitschang J. Bijwe, Influence of cold remote nitrogen oxygen plasma treatment on carbon fabric and its composites with specialty polymers, J. Mater. Sci. 4(46) (2011) 964-974. SCI
  29. Tiwari, J. Bijwe, S. Panier, Influence of plasma treatment on carbon fabric for enhancing abrasive wear properties of polyetherimide composites, Tribology Letters 41 (2011) 153-162.
  30. Sharma, S. Tiwari, J. Bijwe, Optimization of material parameters for development of Polyetherimide composites, Mater. Sci. Engg. B 168, 1-3 (2010) 55–59. SCI
  31. Bijwe, Rekha Rattan, M. Fahim, S. Tiwari, Erosive Wear of Carbon Fabric Reinforced Polyetherimide Composites: Role of Amount of Fabric and Processing Technique, Polymer Composites 29(3) (2008) 337–344. SCI
 

National Journals- NIL
 Technical Papers –International /National Conferences

International Conferences- 

  1. S. Gupta, S. Tiwari, R. Namdeo, S. Chaturvedi, I. Bhole and A. Taparia, Machining of Natural Fibre Reinforced Composites: A Review, International Conf on Innovations in Product, Process and System Design (ICIPPSD- 2021), Mechanical Engineering Department Shri Vaishnav Institute of Technology and Science, Shri Vaishnav Vidyapeeth Vishwavidyalaya Indore, Madhya Pradesh, March 2021.
  2. S. Gupta, S. Tiwari, R. Namdeo, S. Chaturvedi, I. Bhole and A. Taparia, Mechanical behavior of Banana Reinforced Epoxy Composite by Finite Element Method, International Conf on Innovations in Product, Process and System Design (ICIPPSD- 2021), Mechanical Engineering Department Shri Vaishnav Institute of Technology and Science, Shri Vaishnav Vidyapeeth Vishwavidyalaya Indore, MP, 5-6 March 2021,
  3. Namdeo, S. Tiwari and S. Manepatil, Effects of Laser Irradiation on Adhesive Tribo-Performance of  EVA/HDPE/MA-g-PE/OMMT Blended Polymer Nanocomposites, International Conf on Innovations in Product, Process and System Design (ICIPPSD- 2021), Mechanical Engineering Department Shri Vaishnav Institute of Technology and Science, Shri Vaishnav Vidyapeeth Vishwavidyalaya Indore, MP, 5-6 March 2021.
  4. S. Gupta, S. Tiwari, R. Namdeo, S. Chaturvedi and I. Bhole, Mechanical and Numerical Characterization of Banana Fibre Reinforced Epoxy Composites, International Conf on Innovations in Product, Process and System Design (ICIPPSD- 2021), Mechanical Engineering Department Shri Vaishnav Institute of Technology and Science, Shri Vaishnav Vidyapeeth Vishwavidyalaya Indore, Madhya Pradesh, 5-6 March 2021,
  5. S Rakhecha, V Pare, S Tiwari and G Yadav, Investigation of tribological behaviour of 88WC-12Co coating, IOP Conf. Series: Materials Science and Engineering 810 (2020) 012059, ICEMEM-2019.
  6. Upendra Saran Gupta, S. Tiwari, IOP Conf. Series: Materials Science and Engineering 810 (2020) 012059, ICEMEM-2019
  7. Yashwardhan Singh, Sudhir Tiwari, Static structural and thermal analysis of disc brake pad model, IOP Conf. Series: Materials Science and Engineering 810 (2020) 012073, ICEMEM-2019
  8. S Rakhecha, V Pare, S Tiwari, G Yadav, Investigation of Tribological behavior of 88Wc-12Co coatings, presented in 2nd International Conf on Emerging Trends in Manufacturing, Engines and modelling (ICIMEM-2019) during 23-24 Dec 2019 at Mukesh Patel school of Technology, Management and Engineering, Shirpur, Maharastra.
  9. J V Cristy, A B I Mourd, Tiwari, Tribological analysis of thermal spray coatings of Ni and Al2O3 with dispersion of solid lubricants in wear modes, Proceedings of the ASME 2017 Pressure Vessals and Piping Conference (PVP2017), 2017 Hawaii, United States.
  10. Yadav, S. Tiwari, M. L. Jain, Tribological analysis of extreme pressure and anti-wear properties of engine lubricating oil using four ball tester, Materials Today Proceedings of Intl Conf on Processing of Materials, Minerals and Energy (PMME2016) 2016 Ongole, Andhra Pradesh, India.
  11. Yadav, S. Tiwari, A Rajput, R Jatola, M. L. Jain, A Review: Erosive wear models, Intl. Conf. on Emerging Trends in Mechanical Engg. at Mechanical Engg Department, TIT Bhopal from, 2016.
  12. Namdeo, S. Tiwari, S. Manepatil, N. Chand, Optimizing the Effect of Addition of MA-g-PE Compatibilizer on Two-body Abrasive Wear Behavior of EVA/HDPE Polymer blend using Taguchi and ANOVA, Proc. of International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering, Greater Noida, India, 2016, 39-43.
  13. Tiwari, John V Christy, Tribological analysis of thermal spray coatings with dispersion of solid lubricants in erosive wear modes, in 3rd International Conference on Innovations in Automation and Mechatronics Engineering (ICIAME) 2016 at G. H. Patel College of Engg & Tech, Vallabh Vidyanagar, Gujarat on 5-6 Feb. 2016.
  14. Yadav, S. Tiwari, P. Ganai, Performance, condition and prior failure monitoring of IC engine using oil analysis techniques- A review, Intl Conf on Advances in Mechanical Engg, Energy systems and sustainability, Department of Mechanical Engg, LNAT, Gwalior, 22-23- Dec 2014, pp. 57-61.
  15. Namdeo, S. Tiwari, Smita Manepatil, Development of rubber wheel abrasion testing machine for estimation of three body abrasive wear of automobile components, Intl Conf. on Industrial, Mechanical and Production Engineering: Advancements and Current Trends, organized by MANIT, Bhopal, Nov 27-29, 2014, PP. 260-265.
  16. Verma, S. Tiwari, V. Gehlot, An investigation of abrasive wear  in rubber materials, Proceeding of 4th International Conf. on Advances, in Mechanical, Materials, Manufacturing, Automobile, Aeronautical Engg and Applied Physics (AMAEAP-2-14) organized by Krishi Sanskriti at JNU New Delhi on June 7-8, 2014.
  17. Tiwari, J. Bijwe, Surface treatment of carbon fibers-A review,2nd International Conference on Innovations in Automation and Mechatronics Engineering (ICIAME) 2014 at G. H. Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat on 7-8 March 2014.
  18. Tiwari, S. Khedkar, J. Bijwe, Adhesive wear studies of surface treated carbon fabric polyetherimide composites using Taguchi technique, presented at AsiaTrib 2014, an International Conf. at Agra, Feb 17-20, 2014.
  19. Tiwari, Ankit Panchal, Experimental set up used for tensile properties of thin wires, 1st International Conf. on Mechanical Engineering: Emerging Trends for Sustainability at Maulana Azad National Institute of Technology, Bhopal from Jan. 29-31, 2014.
  20. Tiwari, J. Bijwe, S. Panier, Enhancement of tribological properties of CF-PEI composites through surface treatment of fibers, Intl Conf. on Advances in Tribology & Engineering Systems (ICATES) at Gujrat Technological University, Ahmedabad, Oct 15-17, 2013.
  21. Tiwari, J. Bijwe, S. Panier, Enhanced abrasive wear performance of carbon fabric-pei composites by various ways of strengthening fiber matrix interface, 8th Intl. Conf. On Industrial Tribology at Pune, India from Dec. 7-9, 2012.
  22. Tiwari, J. Bijwe, S. Panier, Tribological studies on polyetherimide composites based on carbon fabric with optimized oxidation treatment, 18th Intl. Conf. on Wear of Materials (WOM) 2011, held at Philadelphia, USA from April 3-7, 2011.
  23. Tiwari, J. Bijwe, S. Panier, Gamma radiation treatment of carbon fabric to improve the fiber-matrix adhesion and tribo-performance of composites, 18th Intl Conf. on Wear of Materials (WOM) 2011, held at Philadelphia, USA from April 3-7, 2011.
  24. Tiwari, J. Bijwe, S. Panier, Tribological studies on polyetherimide composites based on gamma irradiated carbon fabric, presented at the Intl. Tribological Congress, Asiatrib 2010 held in Perth, Australia, Dec 5-9, 2010.
  25. Tripathi, S. Tiwari, P. Ganai, P. C. Mani, Wear characteristics of Cu-Pb-Sn alloys using accelerated wear test” Proceedings of  6th Intl. conf. on Industrial Tribology, I. I. Sc. Banglore, Nov. 30-Dec. 02, 2006.
  26. Tripathi, S. Tiwari, V. N. Rao, A. K. Jha, Effect of applied pressure & sliding speed on wear characteristics of 60/40 brass, Proceedings of 6th Intl. conf. on Industrial Tribology, I. I. Sc. Banglore,  Nov. 30-Dec. 02, 2006.
  27. Tripathi, S. Tiwari, V. N. Rao, A. K. Jha, Effect of  sliding speed on wear characteristics of 60/40 brass, Proceeding of Intl. Conf. on Advances in Mechanical Engg., BBSB Engg. College Fatehgarh Sahib, Panjab, Dec 01-03, 2006.
  28. G. Ambekar, S. Tiwari, P. N. Patil, Reliability & availability prediction of a repairable system by MTBF & MTTR, Proceeding of Intl. conf. on Advances in Mechanical Engg., BBSB Engg. College Fatehgarh Sahib, Panjab, Dec 01-03, 2006.
  29. Ganai, K. Tripathi, S. Tiwari, P. C. Mani, Accelerated wear testing using combination of motions. Proceedings of 4th Intl. conf. on Industrial Tribology, December 15-18, 2004, Mumbai.

 
 

National Conferences-

  1. Yadav, S. Tiwari, A Rajpoot, R Jatola, M. L. Jain, Investigation of tribological behaviour of unalloyed aluminium, Proc. of National Conference on Emanate Trends in Mechanical & Allied Engineering Sciences, CDGI, Indore (MP), 2016, pp. 150-155.
  2. Namdeo, S. Tiwari, S. Manepatil, N. Chand ,  Two-body Abrasive Wear Behaviours of Polyethylene vinyl acetate copolymer/High-density Polyethylene (EVA/HDPE) Polymer Blends , Proc. of National Conference on Emanate Trends in Mechanical & Allied Engineering Sciences, CDGI Indore (MP), 2016, pp. 1-7.
  3. Namdeo, S. Tiwari, S. Manepatil, N. Chand ,  High Stress Abrasive Wear Behaviours of Compatibilized EVA/HDPE Polymer Blends, Proc. of National Conference on Emanate Trends in Mechanical & Allied Engineering Sciences, CDGI Indore (MP), 2016, pp. 8-14.
  4. Tiwari, S. Khedkar, Optimizing adhesive wear and coefficient of friction of surface treated carbon fabric polyetherimide composites using Taguchi technique, 3rd National Conf. on Recent Trends in Engineering and Sciences (RTES-2014), at Prestige Institute of Engg & Science, Indore from March 7-8, 2014.
  5. Maheswari, S. Tiwari, P. Ganai, Janki Nandan Mane, Investigation on Properties of Lubricating Oil to Predict its Behavior on System Performance, National Conference on Research and Innovations in Mechanical Engineering [RIME-2014], Technocrats Institute of Technology & Science and TIT College, Bhopal, March 05-06, 2014.
  6. Maheswari, S. Tiwari, P. Ganai, Lubricating oil properties analysis for prediction of contact surface behavior, Presented in National Conf on Recent Trends in Mechanical and Production Engg (RTMPE 2013) at SATI, Vidisha, Dec. 20-21, 2013.
  7. G.Agnihotri, S. Tiwari, Reliability and availability analysis of CNC machine using Markov model, Proceeding of 17th National convention of Mechanical Engineers, Indore, 26-27, Nov. 2001, pp. 628-637.
Projects:
 S. no.  Funding agency  Name of Scheme  Title of project  Amount sanctioned Present Status 
 1.  AICTE  Research promotion Scheme  Development and analysis of composites to study influence of fiber matrix interface on erosive wear performance of polymer composites modified through surface treatment of fibers  21 Lacs  Completed
 2.  AICTE  MODROB  Modernization and Removal of Obsolescence from Tribology Lab of Mechanical Engg department  14 Lacs  Completed
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:

SHORT TERM COURSE / WORKSHOP ORGANIZED/INVITED LECTURES:

One day workshop on “Examination Reforms for Teachers” organized by AICTE on 09 May 2019 at SGSITS
One week TEQIP short term training program on “Tribological Aspects in Mechanical Design” at Shri G S Institute of Tech. & Sc. Indore from March 24-28, 2014.
Two weeks ISTE workshop on Introduction to Research Methodologies organized at Shri G S Institute of Tech. & Sc. Indore in collaboration with Indian Institute of Technology Bombay from June 25- July 04, 2012

  1. S. No. Title of the lecture/Academic Session  Title of Conference/ Seminar etc. Date(s) of the event  Organized by
    1. Tribology of Composite materials AICTE Sponsored Short Term Training Program on Advanced Manufacturing and Materials 10 Dec 2020 JSS academy of Technical Education, Noida
    2. Tribological considerations in design Mechanical Engineering Design Practices and Codes Dec 30-Jan 04, 2014 MED, SGSITS
    3. Role of  lubrication techniques in thermal systems Design and control of thermal systems Jan 24-28, 2015 MED, SGSITS